不锈钢耐热钢铸件的制造过程：
The manufacturing process of stainless steel heat-resistant steel castings:
过程设计。根据样品设计模具或图纸，利用CAE模拟铸造软件设计铸造系统。
Process design. Design molds or drawings based on samples, and use CAE simulation casting software to design casting systems.
1、贴浆：将蜡片组浸入装有水玻家庄电动伸缩门 保定桌椅 保定水处理设备 河北机械加工 保定养老院 保定防水璃等涂料的罐中，涂上涂料。
1. Pasting: Immerse the wax flake group into a tank filled with water glass and other coatings, and apply the coating.
2、喷砂：将石英砂喷在涂有油漆的蜡件上，然后将其浸入装有氯化铵、氯化镁等材料的硬化罐中，然后干燥，然后进行下一层操作。这个过程重复6次左右就完成了。
2. Sand blasting: spray quartz sand on the wax coated with paint, then immerse it in the hardening tank filled with ammonium chloride, magnesium chloride and other materials, dry it, and then carry out the next layer of operation. This process is completed by repeating it about 6 times.
3、注蜡：将液体蜡和固体蜡混合搅拌成糊状蜡膏，用注蜡枪将蜡膏注入金属模具，冷却后取出蜡模。
3. Wax injection: Mix liquid wax and solid wax to form a paste of wax. Use a wax injection gun to inject the wax into a metal mold, cool it, and then remove the wax mold.
4、脱蜡：将表面涂层硬化的蜡组放入失蜡罐中，用蒸汽加热使蜡溶解剥落，留下砂型壳。
4. Dewaxing: Place the hardened wax group on the surface coating into a wax loss tank and heat it with steam to dissolve and peel off the wax, leaving behind a sand shell.
5、制模：根据样品或图纸对产品进行三维建模，用这个三维图纸制作铝或钢的模具。
5. Mold making: 3D modeling of the product based on samples or drawings, using this 3D drawing to make aluminum or steel molds.
6、装蜡：将不锈钢焊刀加热，按工艺设计要求将蜡模焊接在门杆上。
6. Wax installation: Heat the stainless steel welding knife and weld the wax mold onto the door post according to the process design requirements.
不锈钢耐热钢铸件干类主要以抛丸处理对不锈钢的外表进行整理，简单的来讲就是压缩空气来作为动力，将不锈钢耐热钢铸件表面的粘砂与氧化铁等物质处理掉。这种整理方法之前被众多厂家所选用
Stainless steel heat-resistant steel castings are mainly treated with shot blasting to organize the surface of stainless steel. Simply put, compressed air is used as the power to remove substances such as sand and iron oxide on the surface of stainless steel heat-resistant steel castings. This sorting method was previously chosen by many manufacturers
